BALANCES ET BASCULES KERN

CVM-A1500 is a panel mounted power quality analyzer with EMS (Energy Management Software) integrated. Its internal Web Server (html5) allows any user to have full installation control by using any web browser. Designed to be installed in the most relevant or critical part of electric installations since it registers and monitors a wide range of variables (almost one year of data with RMS, maximum and minimum values). The device also registers power quality events such as swells, dips, interruptions (every half cycle) and transients (according to IEC 61000-4-30 Class A). Any event will be immediately captured with the voltage and current waveform. This model adds the measurement of power quality variables (defined in the standard EN 50160) such as flicker, unbalance (Kd) and asymmetry (Ka) coefficients or voltage and current harmonics decomposition up to 63th. In addition it is possible to monitor in real time the instantaneous waveforms of voltage and current through its oscilloscope function. As an added value, CVM-A1500 displays the number of events and transients on each affected phase with the level reached, duration and its associated waveform. In addition, those events are directly displayed in CBEMA, ITIC y SEMI-F47 graphs. The smart design of the CVM-A1500 allows users to customize their own screens in order to access to the information faster and easy. Remark that the device allows the connection though PowerStudio software to save and store, in a redundant way, all the information in a server or PC avoiding memory limits.

We manufacture a range of power monitoring units, including VAR transducers, watt transducers, combined Watt / VAR transducers, mains frequency to current / voltage converters, power factor transducers, AC current and voltage transducers.

The Limes hardness control devices enable cost-effective monitoring of reverse osmosis systems with reliable chemical analysis. Product information LIMES - Reliable and accurate monitoring of water hardness through the use of a laboratory-calibrated indicator. - Monitoring of a defined limit value determined by the LHV indicator used. - No delayed response compared to a swelling resin sensor. - No calibration and no drift effects compared to an electrode measurement. - No wear or regeneration of the sensor necessary. - Separate connection cables for power supply, relay and input contact. - Status display by four LEDs for limit compliance, analysis status, device status and pending service. Product information LIMES Plus - LED status display - Language-neutral - First value suppression to prevent false alarms - Flushing time adjustable to the supply line length - Automatic interval operation: Limit value control of the system in the adjustable interval 10, 20 or 30 minutes - Connections: 2 potential-free outputs: Exceeding limit values Device fault Input contact for potential-free switch External analysis start Pause of the internal interval by a flow switch Diagnostic program for testing the assemblies