Brass Inserts manufactured by Fenix
Our recommended products and services
We offer our customers specialist competence, the highest quality and extraordinarily good service. In addition, by stocking millions of standard parts and special parts, we secure a genuine competitive advantage for our customers. Owner-managed since 1978 You will find out more about our company under Profile. From DIN 1 to DIN 80705 You find our product catalogues under Standard Parts/Downloads. TÜV certified What you can expect from us: Quality and Service. Highly competent and service-oriented Find out what differentiates us from the competition under Services. CNC technology Precision turned and milled parts are found under Special Parts. At your service Find the right contact person at Contact.
A Smalley Laminar Seal Ring set is a metallic labyrinth seal consisting of multiple rings in a groove. The arrangement and the specific orientation of the rings are dictated by the application and the severity of the environment. There are 16 series of standard imperial and Metric Laminar Seal Ring configurations from which to select. 8 of these series are sets consisting of single-turn rings. The other 8 series are sets consisting of double-turn rings. Within each series are operational ring-set configurations in both imperial and metric sizes. The selection of the appropriate set should be determined by the application. For some applications a complete labyrinth configuration (i.e.; a complete labyrinth configuration is one which has rings staggered within the set) is necessary due to a severe environment where contamination is highly probable. In other applications design engineers can keep the groove dimensions minimal by specifying laminar sets with rings clinging either to the bore or to the shaft
HEICO-LOCK® Combi-Washers enable quick and easy assembly, especially in difficult installation situations. Combine the simple to use HEICO-LOCK® Combi-Washers with all commercially available bolts provided by your suppliers, quickly and easily. Advantages of HEICO-LOCK® Combi-Washers Easy mounting and permanent connection thanks to the inset tabs Can be combined with all commercially available bolts Also available in small purchase quantities Flexible use for various different types of bolts Permanent securing and correct positioning of HEICO-LOCK® Wedge Lock Washers Can be re-used several times Cost savings through increased productivity Available in steel or stainless steel with narrower and wider contact areas Available from M8 to M16 Can be supplied completely pre-assembled on request
HEICO-TEC® Tension Nuts in strength class 8 and 10 meet all the requirements of ISO 898-2 which enables you to easily replace any hex nut from the same strength class while also offering all the advantages of a hand-tightened nut. Our standard program of HEICO-TEC® Tension Nuts offers you the following advantages: - Fast delivery: On stock and therefore directly available - Compatible with DIN EN ISO 898-2: Direct replacement of hex nuts from the same strength class possible - Extended service through consultation as well as installation aids for technical documentation (e.g. assembly template) In addition to the HEICO-TEC® standard range, we manufacture special tension nuts according to customer specifications. We can tailor HEICO-TEC® Tension Nuts suitable to your specific application. Other strength classes, sizes or thread pitches are also possible as are tension nuts made from special materials or with special coatings. Advantages of the HEICO-TEC® Tension Nut Simple A hand-held torque wrench is all you need for tightening and loosening. No special tools are required. This makes maintenance far easier. Fast Manual pretensioning saves on the transport and set-up times that would be required by special tools. HEICO-TEC® Tension Nuts are often tightened in the same time it takes to set up electric, hydraulic or pneumatic tools. Reliable The pressure pins act like springs and increase the flexibility of the bolted joint. This compensates for settlement of the joint, thus preserving preload. Safe The pressure pins act like springs and increase the flexibility of the bolted joint. This compensates for settlement of the joint, thus preserving preload. Durable The greater flexibility reduces the bolted joint’s dynamic stress, thus increasing its service life. Precise Controlled friction characteristics ensure the highest tightening and repeat accuracy – guaranteed and confirmed by DNV GL. Reusable As the HEICO-TEC® assembly is not damaged during tightening and loosening, the HEICO-TEC® Tension Nuts are reusable. Compatible HEICO-TEC® Tension Nuts comply with all ISO 898-2 requirements. You can directly replace any conventional nut from the same strength class. Economical Our efficient and high volume manufacturing process means that we can transfer the cost benefits directly to our customers.
Description of the Product
Brass Inserts manufactured by Fenix Metal Link are used in PPR moulding for the flow of hot and cold water. They have evolved an entire line of Brass Inserts for all types of fittings, as well as: heat, thermal, ultrasonic, and press-in and mould-in.
Available in Male and Female threaded version:
• Male: (3/8") (1/2") (3/4") (1") (1.1/4") (1.1/2") (2") (2.1/2") (3") (4”) (5") BSP, BSPT, NPT Threaded
• Female: (3/8") (1/2") (3/4") (1") (1.1/4") (1.1/2") (2") (2.1/2") (3") (4”) (5") BSP, BSPT, NPT Threaded
• Brass PPR Fitting Inserts
• Brass Male and Female PPR Inserts
Fenix Metal Link combines industrial standards with customer specifications to manufacture wonderful products in the category of Moulding Inserts and CPVC Fittings.
Brass Inserts are available in Natural, Nickle Platted, Chrome Platted, Tin Plated or any coating as per customer specifications.
Products manufactured by Fenix Metal Link have formed a backbone for the following industries: automotive industry, electronic goods manufacturing industry, electrical applications industry etc.
Price of the Product
Characteristics of the Product
- Dimension (3/8") (1/2") (3/4") (1") (1.1/4") (1.1/2") (2") (2.1/2") (3") (4") (5")
- Origin India
• Surface treatment – Natural brass, Nickle plated, Chrome Plated