Companies - Testing services, rubber and plastics - India

Refine my search:
Search results for : India
11 Companies
Testing services, rubber and plastics
Discover our Trusted Top Suppliers

Vitro Labs

Providing Services In The Following Fields: Environmental Impact Assessment (EIA), Environmental Clearance, Environment Monitoring Services, Environment Studies, Analytical Division, Water, Waste Water Analysis, Solid Waste Hazardous Waste Analysis, Industrial Oil, Petroleum Products Analysis, Chemicals, Minerals, Feeds Analysis, Foods, Edible Oils, Metals etc, Analysis. Environment Division: We conduct surveys and researches time and again in order to keep a close check over the air pollution levels, water contamination, soil quality, noise level measurements, etc, and provide apt solutions accordingly. Areas are: Air Pollution, Air Pollution monitoring & Analysis, Stack emission monitoring / measurements, Noise level measurements, Water quality sampling & Analysis, Waste Water / Effluent testing, Soil quality testing, Work Place Environment monitoring as per OSHA/ NIOSH/EPA methods and standards, Indoor Air Quality (IAQ) monitoring & assessment and Hygiene Studies. Laboratory / Analytical Division: We carry out integrated analytical quality tests and research to check the properties of various industrial raw materials and also the finished products as listed below. Chemical analysis of building materials like., cement, aggregates, steel, metals and alloys, Ores and Minerals, Water and Wastewater, Petroleum products and Lubricating oils, Edible oils, Insecticides and pesticides, Chemicals, solvents and reagents, Fertilizers, Species, condiments and sweetening agents, Cereals and food grains, Milk and fruit products, Confectionery and food colors, Compressed Air Validation & Nitrogen Gas Validation.

Supplier of:

  • Air pollution analysis and treatment services
  • Air pollution testing and analysis services
  • Waste water and water pollution analysis and treatment services...

Chennai Mettex Lab Private Limited

Chennai Mettex Lab Pvt Ltd Offers Testing Services for Metals, Water Effluent Waste, Waste Water, Packaged Drinking Water, Portable Water, Air Monitoring & Stack Monitoring. We are a NABL accredited lab, as per ISO/IEC: 17025:2005 for various scopes like metals (Ferrous and Non-Ferrous for chemical and mechanical testing - Tensile, Elongation, Yield, Hardness, Microvickers, rubber), Chemical analysis of Drinking water, Waste water, Effluent water, Cooling Tower water, Swimming pool water, Food Microbiology etc, Scope of accreditation: 1. Metals - Ferrous & Non-ferrous Chemical Testing of all Metals by Optical Emission Spectrometer for Fe, Al, Cu, Ni and ConventionalAnalymechanical Testing / Hardness. 2. Heavy metal analysis: For ROHS/ELV - Euro-norms Metals / Plastic / Rubber etc. Lead, Cadmium, Mercury, Hexavalent Chromium Salt Spray Test as per ASTM / IS / ISO / JIS Methods. Water: Microbiology and Chemical, Packaged Drinking Water Microbiology and Chemical, Effluent / Waste Water, Solid Waste / Sludge, Soil, Swimming Pool Water: Microbiology and Chemical, Cooling Tower Water, Boiler Feed Water, Environmental Testing . Ambient / In-plant air quality and Stack emission from stationary sources & Noise level measurement, Trace metal analysis in PURE GOLD and PURE SILVER like PLATINUM, IRIDIUM, BISMUTH, COPPER and More. Food Microbiological Testing, Nutrional Labelling, Chemical & Micrological Testing. We Perform Tests on both Ferrous and Non-Ferrous Metals, Aluminum, Copper, Nickel & Zinc Base Alloys, Bitumen and its Products, Rubber Materials, Plastics, Paint, Grease, Oil, Water, Waste Water, Effluent, Air, Noise Pollution Samples. Furthermore, we also Provide Identification of Polymer in Rubber & Plastic Materials, Characterization of Physical Properties Such as Tensile, Elongation, Flexural Strength, Aging Properties, Environment Heat Cycle, Flammability and Low Temperature Tests. Testing Services.

Supplier of:

  • Air pollution analysis and treatment services
  • Air pollution testing and analysis services
  • Emission and immission measurement services, air...

Jyothi Spectro Analysis Private Limited

Jyothi Spectro Analysis Private Limited Is A Specialised Services In Inspection & Carries Out Mechanical, Chemical, Metallurgical & Non-Destructive Testing to National & International Specifications. Materials Analyzed in the Chemical Testing Laboratory include:Aluminum Alloys, Carbon, Low Alloy & Stainless Steels, Cobalt Alloys, Copper Alloys, Magnesium Alloys, Nickel Alloys, Superalloys, Titanium Alloys, Tool Steels, Zinc Alloys, Cast Iron, Weld Metals,Carbon & Sulphur by Combustion, Water. Mechanical Tests: Tensile Test, Hardness Test, Charpy test, etc. Tests are conducted as per ASTM, BS, IS, DIN, or client specified standards. Metallography: Metallurgical tests carried out in Met Lab include: Phase Identification, Alloy Segregation, Macrostructure, Weld Profile checking, Depth of Penetration, Grain Size, Grain Flow, Coating Thickness Measurement, Non Metallic Inclusion Rating , Nodularity, Mesh Size, Particle Count, Coating Analysis, Failure Analysis,Material Defects, Heat Treatment Condition, Surface Carburization, Decarburization,Case Depth Measurement. Chemical Analysis Carried out by Spectrometer & Wet Analysis, NDTS such as Ultrasonic, Radiography, MPI & DPT. Third Party Inspection Petrochemical, Fertiliser, Chemical Projects & Welding & Fabrication, Inspection of Pressure Vessels, Heat Exchangers, Boilers, Storage Tanks. Non Destructive tests carried out in NDT lab include:Ultrasonic Test, Radiographic Test, Magnetic Particle Test, Liquid Penetrant Test.

Supplier of:

  • Measuring instruments, magnetism
  • Test equipment, magnetic property
  • Ultrasonic measuring equipment...
Back to top